1898 Custom Gaff Cutter Te koop

1898 Custom Gaff Cutter for Sale by Samuel Bond. Classic Sailing Vessel in Palma, Spain

ENGINE:
1 x 50hp Perkins Perkins 4108

CAPACITIES:
Fuel:    43 Litres

MECHANICAL EQUIPMENT:
Batteries – domestic and separate engine start  
1 x Alternator 12V  
1 x Alternator 24V  
Voltage 12V/24V/220V  
Bilge pumps  

ACCOMMODATION: Berths: 5, Cabins: 1, Head: 1
Accommodation fitted out in mahogany with white deck heads  
Double berth to port  
Single berth starboard  
2 cot berths  

GALLEY/LAUNDRY:
Hob x 2  
Oven  
Sink  

NAVIGATION:
Chart plotter GPS Lowrance Global Map 9200  
B & G Hydra 3000 Log Depth sounder and wind  
VHF - Simrad RS87  

DECK:
All deck bronze fittings from the same bronze alloy  
Teak deck (Oregon pine, 2 coats marine plywood, 13 mm old Burnamese teak)  
Superstructures in same old teak  
Frames: Iroko laminated with intermediate steamed American oak  
Electric anchor capstan windlass - bronze 500W 24V  
Anchor CQR 25 lb with 50 m of 10 mm chain  
Deck and mast fittings - bronze  
Deck cleats - teak and bronze  
Fairleads - bronze  
Butterfly hatch over main saloon  
Pin racks – teak with bronze belaying pins  
Mushroom vents - bronze  
Deck prisms  
Deck furniture restored to comply with original plans  
Covers for all deck furniture and capping rail  

SPARS & SAILS:
All spars in hollow Oregon pine using bird's mouth technique
All spars with bronze fittings
All sails by Ratsey and Lapthorn, apart from one balloon by Quantum
Main
Gib top sail with spars jackyard and luffyard
Staysail
Flying jib
Top sail flying jib
Light genoa
Yankee
2 Balloon jibs (one small, one big)
Spinnaker pole
Running backstays to masthead

SAFETY:
Fire extinguisher  
Lifejackets x 8  
Liferaft – 8 persons  

TENDERS/TOYS:
Small inflatable dinghy and outboard (Honda)

SERVICE HISTORY AND CONSTRUCTION:
Hull made out of pitch pine  
Keel combines elm with lead 4.5 tonnes  
Complete refit in 2006 (including new rig)  
First place in the "Regata Illes Baleares", "Copa de España de Clásicos" and "Regata Puig Vela Clàssica"  
 

BROKERS COMMENTS:
Marigan, a Classic Gaff Rig Cutter for sale in Mallorca, was originally named "Molita" (little Molly) after the daughter of her first owner and designer, Charles Livingstone in Liverpool. She was built by Samuel Bond at the Birkenhead Shipyard in 1898, the same builder of "Española", which was later sailed by King Alfonso XII of Spain.  
 
Her reconstruction quality was exceptional, enabling her to race hard and secure numerous trophies in the classic regattas.  
 
Her current owner renamed her Marigan, formed from the initials of his daughters.  
 
Contact Dolphin Yachts in Club de Mar
For more information or to schedule a private viewing of the 1898 Custom Gaff Cutter, contact Dolphin Yachts today at +34 609 622 313 in Palma, Spain.