Monte Carlo Yachts MCY 65 2012

EXTRA CLEAN ...FRESHWATER BOAT THATS LOADED WITH OPTIONS .... THIS BOAT SHOWS EXTREMELY WELL ...

Hull Design and Characteristics

• MCY 65 has a planing hull, with a 15° deadrise angle along the entire bottom, deep ?V? bow, with 6 iso-parametric spray rails.
• Hull, deck and superstructure are made in sandwich lamination using only vinylester resin in the external skin to prevent osmosis phenomena and DCPD resin.
• A bow crash box to improve the resistance to waves and impacts is provided. Furthermore, in that same area, the hull is reinforced by using kevlar lamination.
• Structural bulkheads are in sandwich.
• The other internal partition walls are built using LARICROSS composite
• The structural project of the hull is according to CE-Design Category A

Power and Drive Systems

• Engines
• • (2) MAN V8 1200, 8 cylinders, 90° V design
• Gearbox
• • ZF 510 - 1 A
  • Direct mount marine transmission
• Shafts
• • Aquamet 22, diam. 80 mm
• Propellers
• • NiBrAl alloy, four blades, 880 mm diameter
• Rudders and Steering System
• • Steel, 0.25 sqm surface
  • Power assisted steering system
• Dual Station Bow Thruster
• • 24V 10kW (210kgf)
  • Maneuvering system option:
  • • Maneuvering joysticks (main helm and flybridge) for easy control at docking, with electronic control of bow thruster and engines (and stern thruster when option is installed)
  • Flaps:
  • • Hydraulic Trim Tabs System
  • Option1 :
  • • Humphree ATOS
  • Option2:
  • • Humphree ATOS +BTOS+CTOS

Mooring

• 40 kg anchor with 70 m chain
• Reversible electric anchor winch, with foredeck, main helm and flybridge controls (controls on floor for up/down/captain operation)
• Stem head roller with automatic anchor launch and retrieve
• Bow stainless steel protection
• Stainless steel bow fairleads with stainless steel protection
• Stainless steel bow, stern and 6 spring cleats ( and additional 2 as option)
• Option: twin stern mooring electric winches
• Stern stainless steel fairleads with rollers