- Builder
- NorthCoast
- Model
- 255HT
- Freshwater Fishing +3
- Length
- 31.1 ft
- Built in
- United States (USA)
General
BuilderNorthCoast
Country of Origin🇺🇸 United States (USA)
Boat TypeFreshwater Fishing, Pilothouse, Saltwater Fishing, Cuddy Cabin
CategoryPower
Hull TypePlaning
Hull ModifierDeep-V, Hard-Chine
Hull MaterialFiberglass
Vessel DesignerNorthCoast
Accommodation
LayoutLayout 1
Guest Limit2
Number of Cabins1
Double Bed1
Total Berths2
Wet Head1
Total Heads1
Engines
Standard · 2× Yamaha F250
Drive TypeOutboard
Engines2
Horsepower per Engine250 HP
Fuel TypeGas
Measurements
Overall Length31.1 ft
Beam9.4 ft
Draft1.6 ft
Dry Weight7,981 lb
Fuel Tank Capacity174 gal
Figures are for the current generation unless marked otherwise. Where a specification differs by generation or engine package, it is shown for the relevant version.
What Is a NorthCoast 255HT?
Sporting classic lines with a private head the New 255HT sleeps two (75” Length) and has 6’2”at the helm. With a wide-open layout in the pilothouse and cockpit, there is excellent visibility and substantial amount of room for fishing or cruising. NorthCoast 255HT has twenty-two-degree dead-rise able to run soft and dry across wave tops with a wide-open throttle of 60 plus mph light load. Mid 50’s with full load (with optional Twin 250’s). We listened to those asking for the next new model to be larger than the 235HT with a private head, sink to wash up, and comfortable accommodations for two. For serious anglers you’ll arrive at the fishing grounds in comfort with all weather protection and enjoy a longer and wider cockpit to fight big fish- which you can bring aboard through the walk thru transom door.
Boats Similar to the NorthCoast 255HT
Other NorthCoast models to compare with the NorthCoast 255HT.
NorthCoast 255HT Exterior
NorthCoast 255HT Interior
NorthCoast 255HT Deck Layout
Frequently Asked Questions
The current generation of the NorthCoast 255HT measures 31.1 ft overall, with a beam of 9.4 ft.
Top and cruising speed depend on the engine package and load. Check the engines tab in the specifications above and the individual listings for the figures of each hull.
New hulls are priced by the builder and its dealers and include the current generation's equipment. Used hulls are priced by their owners and reflect age, hours, condition, and upgrades since delivery.